Features

Bourdon tube pressure gauge for diaphragm seals

Nominal ranges 0…4 to 0…25 bar

High quality case with bajonet ring DN 100
per DIN EN 837-1 S1

Case and measuring element of stainless steel

Degree of protection IP 65

Accuracy class 1.0 as per DIN EN 837-1

Small temperature error by means of
reduced-volume measuring element

Operating temperature up to 200°C

Process connection via diaphragm seal
product group D5

Instrument connection welded with diaphragm seal

Options

Approvals/Certificates
- Explosion protection (ATEX) for mechanical devices
- GOST-R certificate of conformity and declaration
- Certificate of measuring equipment for
Russian Federation
- Material per DIN EN 10204
- Calibration certificate per DIN EN 10204

Damping of movement

Higher overload protection

Electrical contact device,
see data sheet D3-025 (depending on design)

Electronical angle-of-rotation sensor,
see data sheet D6-020

Case with liquid filling and degree of
protection IP 66

Applications

The pressure gauge type series BH42.. has been especially constructed for the operation with diaphragm seals. A custom bourdon tube that is reduced in volume produces a very slight temperature error only. Diaphragm seals with reduced diaphragm surface areas may also be used. A large selection of diaphragm seals − D5 product category − is available for a large variety of applications.

Application area

● Machinery construction
● Chemical and petrochemical industry
● General process technology
● Food industry
● Pharmaceutical industry

Type series

BH4200;BH4210;BH4220;
BH4230;BH4240;BH4250